570-437-0990

FREE shipping for orders over $50 (USA only)

main product photo

BOT - 700

model # T-466
$99.95

In stock - Ships in 24 Hours

Hydrate While You Hike

Decrease cooking times, meal waiting times, and fuel usage with the BOT - 700! Its watertight screw-top lid and 700 ml volume is perfect for pre-soaking your dehydrated and freeze-dried meals for easier and tastier results. It can also carry, cook, measure, store, and hold almost whatever you want it to. It'll become your go-to companion for every trip.

Features

  • Pure grade titanium
  • 100% biocompatible
  • 700 ml capacity
  • Watertight screw-top lid
  • Lid doubles as cooking lid
  • Temperature resistant O-ring
  • Graduated measurements
  • Foldaway handles
  • Easy to clean

Specifications

  • Weight: 4.8 ounces (138 grams)
  • Capacity: 700 ml (23 oz)
  • Outer Diameter: 4.1 inches (105 mm)
  • Inner Diameter: 3.8 inches (96 mm)
  • Height: 4.8 inches (122 mm)

Save fuel and reduce cooking and waiting times with the BOT - 700! The BOT - 700 is built around a simple concept: use a lightweight, watertight container to pre-hydrate meals while hiking to save time, fuel, and improve taste. Simply add your food and the necessary amount of water to the BOT - 700 an hour or more before you finish hiking for the day, then throw it on the stove to warm it up using a fraction of the time and fuel needed to boil water and cook your food. Presto!

Similar to our standard BOT (Bottle + Pot) but with a shorter height and attached handles, the BOT - 700 can also carry, cook, measure, store, and hold almost whatever you want it to. It'll become your go-to companion for every adventure.
 

Features

  • Pure grade titanium
  • 100% biocompatible
  • 700 ml capacity
  • Watertight screw-top lid
  • Lid doubles as cooking lid
  • Temperature resistant O-ring
  • Graduated measurements
  • Foldaway handles
  • Easy to clean

 Specifications

  • Weight: 4.8 ounces (138 grams)
  • Capacity: 700 ml (23 oz)
  • Outer Diameter: 4.1 inches (105 mm)
  • Inner Diameter: 3.8 inches (96 mm)
  • Height: 4.8 inches (122 mm)

Need replacement parts? Contact us to get 'em!

CAUTION! Lid must be unscrewed and flipped over while cooking to prevent explosion. Serious injury could occur.

 

Do you have any Question?  

Enter Your Question : BOT - 700
Please type the letters and numbers below
Question:

What material is the Temperature resistant O-ring made of? Is it the same as in Ti water bottle's O-ring?

(0)
By Oksana
on 4 November, 2019
Answer:
  • The o-ring of the BOT-700 is the same temperature resistant, food safe silicone as featured on the water bottle.
    (0)
    By Vargo
    on 4 November, 2019
Question:

I mostly use my Bot for cold soaking. What's the best way to clean under the curved lip on the inside of the lid in the backcountry? I don't want it to accumulate leftovers for days and become a breeding ground for germs as I'm not cooking (=sterilizing) the food.

(0)
By Marcus
on 4 November, 2019
Answer:
  • A plastic pot scrubber and a little bit of water is a great way to keep your BOT clean in the backcountry!
    (0)
    By Vargo
    on 4 November, 2019
Question:

Does the BOT-700 sit appropriately on top of the Hexagon Wood Stove? Is it stable?

(0)
By Kenneth
on 4 November, 2019
Answer:
  • Yes. The BOT-700 will sit very well on top of the Hexagon Wood Stove.
    (0)
    By Vargo
    on 4 November, 2019
Question:

Hello ! Compared to the parabottle, is the bot’s wall thicker ? Can the bot and the parabottle both handle hot drink transport ? Thank you !

(0)
By Coralie
on 4 November, 2019
Answer:
  • The para-bottles and the BOT can both certainly handle hot drinks. The BOT was designed to be able to cook and eat/drink out of, while the para-bottles are meant to be able to hold any drink that you might want to carry with you on your journey. As for their thicknesses, the BOT and Titanium Para-Bottles are both 0.5mm thick.
    (0)
    By Vargo
    on 4 November, 2019
Question:

What is the capacity (in ml) of the lid when used as a mug?

(0)
By Thomas
on 4 November, 2019
Answer:
  • The capacity of the lid is 215 ml.
    (0)
    By Vargo
    on 4 November, 2019
Question:

Is there a spare gasket available for the Bot 700??

(0)
By Joe
on 4 November, 2019
Answer:
  • Yes! We can provide replacement o-rings for any of our products at no cost.
    (0)
    By Vargo
    on 4 November, 2019
Question:

Hi, will the Vargo BOT 700 and larger 900ml BotPot work on simple electric coil burners such as this one?: https://www.walmart.com/ip/Brentwood-Appliances-TS-322-Electric-Single-Burner-White/22107797

(0)
By Shawn
on 4 November, 2019
Answer:
  • There should be no problem using an electric stove. Both the BOT 700 and the BotPot were designed to be used for cooking.
    (0)
    By Vargo
    on 4 November, 2019
Question:

Is there a easy/ safe way to break the vacuum after hiking down a few thousand feet in elevation?

(0)
By John
on 4 November, 2019
Answer:
  • Yes there is! Follow our easy tutorial here: http://blog.vargooutdoors.com/screwing-around-with-the-bot-unsticking-a-stuck-lid/.
    (0)
    By Vargo
    on 4 November, 2019
Question:

Is these BOT models are made from 100% pure titanium, or titanium alloy? If they are made from titanium alloy, what is the name/grade of this alloy exactly?

(0)
By Amos
on 4 November, 2019
Answer:
  • Yes, they along with all of our utensils, mugs, pots, flasks, and water bottles are made from pure grade titanium (non-alloyed). Thanks!
    (0)
    By Vargo
    on 4 November, 2019
Question:

Will the 700ml BOT nest into the 750ML Ti-Lite Mug or the Ti BOT?

(0)
By Jay
on 4 November, 2019
Answer:
  • Unfortunately, it won't nest into either. Thanks!
    (0)
    By Vargo
    on 4 November, 2019

#VARGO